Engineering materials have to be tested for creep before they are used for any project. The low temperature creep apparatus fabricated for this project uses a simple levels to transmit a tensile stress to a specimen.The elongation of the specimen due to the tensile stress is measured using a dial gauge. A weight hanger and a stirrup are provided for the weights which are used to produce this tensile stress. To hold the specimen in place, loading pins are loading stirrups a re provided and a rest pin beeps the apparatus steady when not in for the setting up of the whole apparatus. Results of experiments carried out with the apparatus are provided and the general friends agree with those in the literature.
TABLE OF CONTENTS
CHAPTER ONE
Introduction 1
1.2 The purpose of the project 6
1.3 Demand for the equipment 6
1.4 Literature review 7
1.5 Kinds of phenomena 8
1.6 Examples 10
1.7 Mechanism 11
CHAPTER TWO
Description of apparatus and design theory 13
2.1 static equilibrium conditions 17
CHAPTER THREE
Calculation 21
3.1 Calculation the maximum load 24
CHAPTER FOUR
4.1 Experimental procedure and result 34
4.2 Method of assembly 36
Terms of Use: This is an academic paper. Students should NOT copy our materials word to word, as we DO NOT encourage Plagiarism. Only use as a guide in developing your original research work. Thanks.
Disclaimer: All undertaking works, records, and reports posted on this website, eprojectguide.com are the property/copyright of their individual proprietors. They are for research reference/direction purposes and the works are publicly supported. Do not present another person’s work as your own to maintain a strategic distance from counterfeiting its results. Use it as a guide and not duplicate the work in exactly the same words (verbatim). eprojectguide.com is a vault of exploration works simply like academia.edu, researchgate.net, scribd.com, docsity.com, course hero, and numerous different stages where clients transfer works. The paid membership on eprojectguide.com is a method by which the site is kept up to help Open Education. In the event that you see your work posted here, and you need it to be eliminated/credited, it would be ideal if you call us on +2348064699975 or send us a mail along with the web address linked to the work, to eprojectguide@gmail.com. We will answer to and honor each solicitation. Kindly note notification it might take up to 24 – 48 hours to handle your solicitation.